* National standard 304 #8 nickel 6 = 1.0-3.5mm stainless steel materials, imported AMADA CNC laser cutting machine is expected to open, import AMADACNC bending machine bending forming, so that the accuracy of the product to achieve 1 %
* Assembled cleaning spray arm and nozzles, not only easy to disassemble, easy to clean. Oval wash range, leaving cleaning without dead ends.
* Since largeapacity stainless steel sieve plate punching and large dark screen basket can be removed for easy cleaning.
* Automatically turn off when closing the outlet, convenient and practicao Sinale door and door switch automatically lock function desian, brinas assurance from the user point of view of safety and practicality.
* Motor overload protection function, effectively prevent the damage is not the time for personnel to operate the equipment itself.
* Automatic water system, automatic temperature control system, automatic tank cleaning water power protection systems and other concepts of design, nof only to make more powerful the machine itself. leaving the user to operate peace of mind, must be assured.
* This product has been the state authoritv. throuah the CE certification. third-party users to enioy insurance, is the National Federation of kitchenware Industry Association of China onlv desianated commercial dishwasher famous brands, and has awarded honorary certificates issued bv the relevant departments.
|Maximum amount of washing (baskets/hour):||180|
|Washing heating power(KW):||36|
|Electricity And Spray Heater Configuration :|
|Total electricity consumption:||46/55KW|
|Total electricity consumption:||1.7KW|
|Total electricity consumption:||10.7KW|
|Washing Capacity Reference:|
|Washing quantity: 6 inch disc 6900pcs, 10 inch disc 4500pcs,18 inch disc 2250pcs,4.5 inch disc 4000pcs,cup 9000pcs,knife and fork 30000PCS,chopsticks 60000pcs|
Installation Requires Connection:
# Power: 380v/50hz/3p( three-phase five-wire system), cable:≥ GB 25m㎡,
# Steam Connection: steam pressure: 0.5-3. 5bar, steam consumption: 70kg/h
# Gas connection: water pressure ≥ 0.15mpa; Gas Consumption: 5-5.5m³/h;gas generator tank 68kg, external tank 120kg
# Inlet diameter: 6 (ft), drain diameter: 2 (in); Water pressure: 1.055kg/cm²~1.76kg/cm², preferably 1. 4kg/cm², you need to install pressure over 1.76kg/cm²valve (with other companies)
# Water temperature: 10 ℃ or 50 ℃, according to the configuration of the heater,
# Water hardness: 0.034-0.103g/L
#For information about instaling an exhaust hood(other companies), Displacement: inlet end -5.7m³/min, outlet end-11.3m³/min